# ---------------------------------------------------------------
# Programmer:  Slaven Peles and Cody J. Balos @ LLNL
# ---------------------------------------------------------------
# SUNDIALS Copyright Start
# Copyright (c) 2002-2019, Lawrence Livermore National Security
# and Southern Methodist University.
# All rights reserved.
#
# See the top-level LICENSE and NOTICE files for details.
#
# SPDX-License-Identifier: BSD-3-Clause
# SUNDIALS Copyright End
# ---------------------------------------------------------------
# CMakeLists.txt file for Trilinos nvector examples
# ---------------------------------------------------------------

# Example lists are tuples "name\;args\;tasks\;type" where the type is
# 'develop' for examples excluded from 'make test' in releases

# Examples using SUNDIALS Trilinos nvector wrapper
IF(Trilinos_INTERFACE_MPI_CXX_FOUND)
  SET(nvector_trilinos_examples
    "test_nvector_trilinos\;1000 0\;\;\;"    # run sequentially
    "test_nvector_trilinos\;1000 0\;1\;4\;"  # run parallel on 4 procs
    )
ELSE()
  SET(nvector_trilinos_examples
    "test_nvector_trilinos\;1000 0\;\;\;"    # run sequentially
    )
ENDIF()

SET(shared_SOURCES
  ${sundials_SOURCE_DIR}/src/sundials/sundials_nvector.c
  ${sundials_SOURCE_DIR}/examples/nvector/test_nvector.c
  )


# Dependencies for nvector examples
SET(nvector_examples_dependencies
  test_nvector
  sundials_nvector
  )

# Set Trilinos compilers/flags
SET(CMAKE_CXX_COMPILER ${Trilinos_INTERFACE_CXX_COMPILER})
SET(CMAKE_C_COMPILER   ${Trilinos_INTERFACE_C_COMPILER})
SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${Trilinos_INTERFACE_CXX_COMPILER_FLAGS}")
SET(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${Trilinos_INTERFACE_C_COMPILER_FLAGS}")

# Set Trilinos MPI executable for trilinos tests
SET(MPIEXEC_EXECUTABLE ${Trilinos_INTERFACE_MPIEXEC})

# Add source directory to include directories
INCLUDE_DIRECTORIES(. ..)

# Specify libraries to link against (through the target that was used to
# generate them) based on the value of the variable LINK_LIBRARY_TYPE
IF(LINK_LIBRARY_TYPE MATCHES "static")
  SET(NVECS_LIB sundials_nvectrilinos_static)
ELSE()
  SET(NVECS_LIB sundials_nvectrilinos_shared)
ENDIF()

# Set-up linker flags and link libraries
SET(SUNDIALS_LIBS ${NVECS_LIB} ${EXTRA_LINK_LIBS})

# Add the build and install targets for each example
FOREACH(example_tuple ${nvector_trilinos_examples})

  # parse the example tuple
  LIST(GET example_tuple 0 example)
  LIST(GET example_tuple 1 example_args)
  LIST(GET example_tuple 2 number_of_nodes)
  LIST(GET example_tuple 3 number_of_tasks)
  LIST(GET example_tuple 4 example_type)

  # This is used to get around DLL linkage issue since we are
  # manually including sundials_nvector.c here, which is normally in
  # a library that is included.  If this is not set build system
  # thinks nvector is externally linked.
  IF(WIN32)
    ADD_DEFINITIONS(-DBUILD_SUNDIALS_LIBRARY)
  ENDIF(WIN32)

  # check if this example has already been added, only need to add
  # example source files once for testing with different inputs
  IF(NOT TARGET ${example})
    # example source files
    ADD_EXECUTABLE(${example} ${example}.cpp ${shared_SOURCES})

    SET_TARGET_PROPERTIES(${example} PROPERTIES FOLDER "Examples")

    # Trilinos libraries must be linked after SUNDIALS libraries!
    # Otherwise, segfaults may occur; something to do with RCPs.
    TARGET_LINK_LIBRARIES(${example} ${SUNDIALS_LIBS})
  ENDIF()

  # check if example args are provided and set the test name
  IF("${example_args}" STREQUAL "")
    IF("${number_of_tasks}" STREQUAL "")
      SET(test_name ${example})
    ELSE()
      STRING(REGEX REPLACE " " "_" test_name ${example}_${number_of_tasks})
    ENDIF()
  ELSE()
    IF("${number_of_tasks}" STREQUAL "")
      STRING(REGEX REPLACE " " "_" test_name ${example}_${example_args})
    ELSE()
      STRING(REGEX REPLACE " " "_" test_name ${example}_${number_of_tasks}_${example_args})
    ENDIF()
  ENDIF()

  # add example to regression tests
  SUNDIALS_ADD_TEST(${test_name} ${example}
    TEST_ARGS ${example_args}
    MPI_NPROCS ${number_of_tasks}
    EXAMPLE_TYPE ${example_type}
    NODIFF)

  # install example source files
  IF(EXAMPLES_INSTALL)
    INSTALL(FILES ${example}.cpp
      ../test_nvector.c
      ../test_nvector.h
      ../../../src/sundials/sundials_nvector.c
      DESTINATION ${EXAMPLES_INSTALL_PATH}/nvector/trilinos)
  ENDIF()

ENDFOREACH(example_tuple ${nvector_trilinos_examples})


IF(EXAMPLES_INSTALL)

  # Install the README file
  INSTALL(FILES DESTINATION ${EXAMPLES_INSTALL_PATH}/nvector/trilinos)

  # Prepare substitution variables for Makefile and/or CMakeLists templates
  SET(SOLVER_LIB "sundials_nvectrilinos")

  EXAMPLES2STRING(nvector_trilinos_examples EXAMPLES)
  EXAMPLES2STRING(nvector_examples_dependencies EXAMPLES_DEPENDENCIES)

  # Regardless of the platform we're on, we will generate and install
  # CMakeLists.txt file for building the examples. This file  can then
  # be used as a template for the user's own programs.

  # generate CMakelists.txt in the binary directory
  CONFIGURE_FILE(
    ${PROJECT_SOURCE_DIR}/examples/templates/cmakelists_trilinos_CXX_ex.in
    ${PROJECT_BINARY_DIR}/examples/nvector/trilinos/CMakeLists.txt
    @ONLY
    )

  # install CMakelists.txt
  INSTALL(
    FILES ${PROJECT_BINARY_DIR}/examples/nvector/trilinos/CMakeLists.txt
    DESTINATION ${EXAMPLES_INSTALL_PATH}/nvector/trilinos
    )

  # On UNIX-type platforms, we also  generate and install a makefile for
  # building the examples. This makefile can then be used as a template
  # for the user's own programs.

  IF(UNIX)
    # generate Makefile and place it in the binary dir
    CONFIGURE_FILE(
      ${PROJECT_SOURCE_DIR}/examples/templates/makefile_trilinos_CXX_ex.in
      ${PROJECT_BINARY_DIR}/examples/nvector/trilinos/Makefile_ex
      @ONLY
      )
    # install the configured Makefile_ex as Makefile
    INSTALL(
      FILES ${PROJECT_BINARY_DIR}/examples/nvector/trilinos/Makefile_ex
      DESTINATION ${EXAMPLES_INSTALL_PATH}/nvector/trilinos
      RENAME Makefile
      )
  ENDIF(UNIX)

ENDIF(EXAMPLES_INSTALL)
